|
Product Details:
|
| Condictivity: | <10uS.cm Or Approval Custom Requirement | Frame Material: | SUS304 |
|---|---|---|---|
| Working Pressure: | <1.0mpa | Production Capacity: | 250-10000lph |
| Technology: | Pretreatment+RO | Pump: | CNP |
| Material: | Full Stainless Steel | Contral System: | PLC+Hmi Manual Contral |
| Voltage: | 220V/380V | Certification: | ISO 9001:2008 |
| Highlight: | reverse osmosis water treatment equipment,reverse osmosis water treatment plant |
||
SS304 Reverse Osmosis Water Filter plant with active carbon and quartz sand
1. Introduction
Reverse osmosis removes salt and most other dissolved inorganic material present in the water. It is a kind of membrane separation techniques, when external pressure is applied to the more concentrated(feed water) side of the membrane to reverse the natural osmotic flow. This forces the feed water through the semi permeable membrane. The impurities are deposited on the membrane surface and sent to drain and the water that passes through the membrane as product water is, for the most part, free of impurities. The system which is made up of reverse osmosis components is reverse osmosis system.
2. Specification
| Parameters | ||
| Product | Two stage RO(Reverse Osmosis) water treatment machine | |
| Pure Water Production Capacity | 250-20000 litre per hour(25°C) | |
| Input water quality | TDS≤2000PPM(SDI≤5, 2≤PH≥11, NTU≤1) | |
| Systematic Salt Rejection Rate | ≥98% | |
| Recovery Rate(pure water : inlet water) | 50~75% | |
| Recommended Working Temp. | 5~35°C | |
| Input Power(standard) | AC380V / 50Hz | |
| Pre-treatment | ||
| Quartz Sand Filter(Flux: 6M3/H) |
Φ900×1850mm(t=2.0mm) SUS304 stainless tank with 1200KG quartz sand Or optional fiber glass tank |
|
| Active Carbon Filter(Flux: 6M3/H) |
Φ900×1850mm(t=2.0mm) SUS304 stainless tank with 350KG activated carbon Or optional fiber glass tank |
|
| Micron (PP Sediment) Filter | SUS304 stainless steel tank with 40inch PP filter×7PCS | |
| Booster Pump | China Nanfang CHL8-30 pump×1PC | |
| Multi-stage Pump for first stage RO | China Nanfang CDLS8-160 pump×1PC | |
| Multi-stage Pump for second stage RO | China Nanfang CDL4-220 pump×1PC | |
| Reverse Osmosis System | ||
| Membrane for first stage RO |
U.S. HYDRANAUTIC ESPA-8040 membrane × 7PCS Optional VONFRON membrane and DOW |
|
| Membrane for second stage RO |
U.S. HYDRANAUTIC ESPA-8040 membrane × 5PCS Optional VONFRON membrane and DOW |
|
| Accessories | ||
| Piping | SS304 connection | |
| Touch-screen PLC control panel | America EMERSON PLC with colorful touch-screen operation | |
| Others | Flow metre, TDS metre, pressure metre, electromagnetic valve, etc. | |
| OPTIONAL | ||
| Chemical dosing System for PH adjustment, anti-scaling, etc. | U.S. Pulsafeeder Xo60 Automatic Dosing valve with 50L tank | |
| UV sterilizer |
IP67 waterproof grade UV-40W UV sterilizing(up to 5000hour lamp lifespan) Or U.S. Hanovia lamp(up to 9000hours lamp lifespan) |
|
| Built-in chemical membrane washing device for RO system | For regular membrane cleanning so as to renew and improve the membrane performance | |
3. Advantage of reverse osmosis water filter system
1. System can produce water continuously and high degree automation.
2. No need chemical to regenerate, easy operation and maintenance.
3. Core components of ro system are imported USA DOW membranes.
4. Automatic switch on when low water level, and switch off when high water level
5. System flushes RO membranes automatically, reducing membranes polluted speed.
6. Water shortage protection for multi-stage pump
7. Product water conductivity meter can monitor water quality online continuously.
8. Low operation cost and long life span
9. There’s RO controller, make whole RO system operating automatically.
10. Easily control and Maintained.
11. Auto flush and backwash the prefilters
12. Integrating water flow indicator, conductivity indicator, pressure indicator, control panel
4. Process of reverse osmosis water filter system
5. Product Pictures
Contact Person: Ms. Candie Liang
Tel: +8618823149433
