|Condition:||Brand New||Pump:||Grundfos / Danfoss / CNP Series|
|Working Pressure:||0.8-6.0 Mpa||RO Membrane:||Toray/ Dow Series|
|Product Capacity:||Can Be Customized||Inlet TDS:||According To Different Feed Water Sources|
|PLC:||Omron Or Siemens Brand|
drinking water purification plant,
drinking water treatment plant
Compact Design Containerized RO Water Treatment Plant for Industrial Construction Site
We will design the water treatment plant based on the water quality provided by the customer and the requirement of output water quality.
Description of Reverse Osmosis
Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane
to remove larger particles from raw water. In reverse osmosis, an applied pressure is used to
overcome osmotic pressure, a colligative property, that is driven by chemical potential, a
thermodynamic parameter. Reverse osmosis can remove many types of molecules and ions
from solutions, including bacteria, and is used in both industrial processes and the production
of potable water. The result is that the solute is retained on the pressurized side of the membrane
and the pure solvent is allowed to pass to the other side. To be "selective", this membrane should
not allow large molecules or ions through the pores (holes), but should allow smaller components
of the solution (such as the solvent) to pass freely.
Applicate in Drinking water purification,Military use: the Reverse Osmosis Water Purification Unit,
Water and wastewater purification,Food industry,Maple syrup production,Hydrogen production,
Fast View about Drinking Water Purifier
- Pneumatic control or Electric control
- Wide suitability
- High desalinate accuracy
- Labor saving
- Easy to use and maintain
Capacity & Characteristic of RO Water Filter System
Continuous water production without the need of regeneration, reducing labor cost.
RO membrane imported from USA, with a high desalting rate of 97~98%.
Removing 98% of organic matters and bacteria, with a heat source of more than 98%.
Online electric conductivity monitoring, to ensure good output water quality.
PLC microcomputer monitoring, flushing the RO membrane timely.
Automatic stopping in case of low pressure water shortage and high pressure water sufficiency.
Operating Parameters of Water Filter Machine
Application Scope: Tap water, ground water, well water, river water or seawater
Output Water Quality: Meet the World Health Organization(WHO) Guidelines for Drinking Water Quality, also can be customized via detailed requirements of clients.
Recovery Rate: 35% ~70%, according different feed water source
Adapted water temperature: 2 ~40 °C
Treatment Capacity: customized
Rated power: Depended on feed water quality and treatment capacity.
Electrical Parameters: 3 phases, customized via different country.
Contact Person: hongjun